VX-TRACTOR tyre pressure check

What is the right inflation pressure for any tractor tyre

Unlike a car, a tractor is a multi-purpose vehicle which can carry or pull much more than its own weight, over all types of terrain. These demands are managed by your tyres and the disparity between these demands is the reason why it is important to always have the right pressure settings, to make your equipment last over time.
Carrying out pressure adjustments may seem insignificant, but for your tractor it is a crucial adjustment which will enable you either to double the load, to preserve the soil on your land, to drive slowly with a heavier load or rapidly with no load… 

In this article you will find the explanations you need to help you understand why it is important always to have the right tyre pressure:

1. What is the link between load, speed and tractor tyre pressure?

Pressure, speed and load settings are the three key elements on which the correct functioning of your tyres depends. They operate simultaneously, are interdependent and are necessary to ensure good management of the lifespan of your tyres.

Tyre pressure is an easy adjustment to understand:

  • An increase in pressure allows you to carry more load but increases soil compaction.
  • A decrease in tyre pressure allows you to reduce soil compaction but limits the load on each tyre.

But what really is the link between speed and load? And why are they always associated?

You can see that the tyre undergoes a major deformation at the level of the contact patch with the ground, this deformation is linked to the load which crushes the tyre, and is known as deflection.

Deflection of the tractor tyre in contact with the groundDeflection of the tractor tyre in contact with the ground

 

When you drive, the deformed area progressively regains its initial shape during the rotation of the tyre. At low speed, the tyre has recovered its initial shape after one rotation and everything continues smoothly.

The higher the load, the greater the extent of the deflection, so if you increase speed on the road with a heavy load, the tyre does not have time to get its initial shape back before it comes into contact with the ground again during the next rotation. This results in the deformation getting bigger with each rotation of the wheel as well as excessive heating of the tyre components and can even result in a break in the casing.

That is why the pressure charts always show the inflation pressure that corresponds to a given load for a precise speed. If your speed is higher than indicated in the chart, the inflation pressure for this same load will be insufficient.

 

2. Why inflation pressure changes depending on the load

1. Pressure compensates for load

When a tyre is completely flat, it cannot bear any weight at all. It’s the volume of air within the tyre, i.e. the pressure, which allows it to bear the weight of the tractor and your implements.
The more you increase inflation pressure, the more you increase the tyre’s capacity to withstand the load.
The limit to this load capacity is indicated on the sidewall of your tyre in the form of a number associated with a letter (the number corresponds to a load index and the letter corresponds to a speed index, generally in relation to a nominal inflation pressure of 1.6 bar).

The load index is 171 on the left and 173 on the right
The load index is 171 on the left and 173 on the right. This index shows the maximum load for a given speed, in general with a nominal inflation pressure of 1.6 bar in the usual correlation tables. See the correlation table below

2. Yes, you can exceed the load index in certain conditions

The manufacturer has tested its tyres for use with a maximum load at a given speed and a precise pressure. These are optimal conditions of use for the tyre which allow you to work safely while safeguarding your tyre’s lifespan.

Obviously, you can work with a smaller load and reduce the pressure to avoid soil compaction for example, respecting the minimum pressure recommended by the manufacturer and your driving speed.

But you can also go beyond the load index within a certain limit and on condition that you compensate using the two other settings:

  • Pressure must be increased as a result
  • Speed must be reduced proportionally

» EXAMPLE: for a VX-TRACTOR 900/60 R42
tyre with a load index and speed index of 185 D

Pressure: 1.6 bar
Speed: 65 km/h
Load capacity = 9,250 kg.
Pressure: 2.4 bar
Speed: 10 km/h
Load capacity = 13,900 kg
i.e. 50% more.
Weighing the rear axle to define tyre pressure based on loadWeighing the rear axle to define tyre pressure based on load

 

3. Standard load index table for a pressure of 1.6 bar

The simplest solution for good tyre management still lies in respecting manufacturer recommendations. When it comes to replacing your tyres, you should choose tyre dimensions which take account of the load corresponding to your usual implements so as to never accidentally go beyond the limit.

To find out the load index of your future tyres, you can refer to the standard load index table below with its correspondence in kilos.

This table gives you the maximum load for a pressure of 1.6 bar:

Load index table and correspondence in Kg for a nominal inflation pressure of 1.6 bar
I.C. kg I.C. kg I.C. kg I.C. kg I.C. kg
73 365 74 375 75 387 76 400 77 412
78 425 79 437 80 450 81 462 82 475
83 487 84 500 85 515 86 530 87 545
88 560 89 580 90 600 91 615 92 630
93 650 94 670 95 690 96 710 97 730
98 750 99 775 100 800 101 825 102 850
103 875 104 900 105 925 106 950 107 975
108 1 000 109 1 030 110 1060 111 1 090 112 1 120
113 1 150 114 1 180 115 1215 116 1 250 117 1 285
118 1 320 119 1 360 120 1 400 121 1 450 122 1 500
123 1 550 124 1 600 125 1 650 126 1 700 127 1 750
128 1 800 129 1 850 130 1 900 131 1 950 132 2 000
133 2 060 134 2 120 135 2 180 136 2 240 137 2 300
138 2 360 139 2 430 140 2 500 141 2 575 142 2 650
143 2 725 144 2 800 145 2 900 146 3 000 147 3 075
148 3 150 149 3 250 150 3 350 151 3 450 152 3 550
153  3650 154 3 750 155 3 875 156 4 000 157 4 125
158 4 250 159 4 375 160 4 500 161 4 625 162 4 750
163 4 875 164 5 000 165 5 150 166 5 300 167 5 450
168 5 600 169 5 800 170 6 000 171 6 150 172 6 300
173 6 500 174 6 700 175 6 900 176 7 100 177 7 300
178 7 500 179 7 750 180 8 000 181 8 250 182 8 500
183 8 750 184 9 000 185 9 250 186 9 500 187 9 750
188 10 000 189 10 300            

 

3. Why take speed into account in pressure settings?

To preserve your tyre’s constituent materials and ensure a good lifespan, it is definitely best not to exceed the speed index when loaded.

With a high speed index, the tyre deforms and the internal structure heats up (up to 65° at high speed and overloaded) leading to rapid wear to the rubber in the tread.

While it is advisable to reduce pressure to avoid soil compaction in your fields, an underinflated tyre on the road will suffer many kinds of damages:

  • Lifespan reduced by 25% due to the abrasiveness of the asphalt.
  • Reduced stability in the bends and when braking, as underinflated sidewalls suffer from excessive deflection.
  • Increased fuel consumption due to the extra-large contact patch with the ground.
  • Irreversible damage to the casing linked to the collapsing of the sidewalls.
It is therefore preferable to increase pressure on the road while remaining within the limits indicated in the markings on the sidewall for which you will find the equivalent in km/h in the table below:
Speed index charts with correspondence in Km/h
Speed index Speed (in Km/h)   Speed index Speed (in Km/h)
A1 5   B 50
A2 10   C 60
A3 15   D 65
A4 20   E 70
A5 25   F 80
A6 30   G 90
A7 35
A8 40

Yes, you can exceed the speed index in certain conditions

As far as respecting speed is concerned, the relation to load is inevitable; if you drive with no load, exceeding the speed index will have no consequences on the structure of the tyres, on condition that you comply with applicable regulations and safety rules.

ETRTO (European Tyre and Rim Technical Organisation) has recommended adjusting pressure and load based on driving speed. At high speed, an inflation pressure higher than the load correspondence is recommended (while staying within the maximum limits recommended by the manufacturer).

Consider appropriate inflation pressure in advance if you have long distances to travel by road:

  • To increase speed by more than 10 km/h
    = increase pressure by 0.20 bar

As well as reducing your load:

  • To increase speed by more than 10 km/h
    = reduce the load by 5%
To increase speed, it is better to drive with no load or with a light loadTo increase speed, it is better to drive with no load or with a light load

 

4. VF tyres: the best solution to avoid repetitive pressure adjustments

If you don’t have time to adjust the inflation pressure in your agricultural tyres when you go from field to road, your best solution is to use VF technology tyres.

VF tyres (Very Improved Flexion) provide great operating flexibility. They are made with very high-tech components, have a very supple sidewall and a more resistant structure which makes them extremely polyvalent for use on all types of land. You no longer need to adjust pressure settings between field and road.

This progress is really convenient and saves considerable time for farmers who are always in a hurry and who don’t know which pressure is best for each type of ground.

In addition to this considerable advantage, these new technologies are designed to bear higher loads. With the same inflation pressure, a VF tyre will be able to carry 40% more load than a standard tyre.

Good to know unlike standard agricultural tyres which cannot go below 1.2 bar, VF tyres were designed to be inflated to less than 0.8 bar despite the bonus load, making them highly effective in terms of soil preservation.

 


The Bridgestone-agriculture.eu blog is written and administered by tractor tyre experts who are available to provide you with the advice that you need about your farming tyres. They will help you to maximise your productivity with information on all things relating to tyres: inexpensive tractor tyres - technical data for farming tyres - advice on farming tyre pressure - solution to avoid soil compaction - sprayer tyre pressure - Why and how to ballast your tractor tyres - when to use twin wheels - the mechanical causes of abnormal wear - cheap agricultural tyres - etc...

To take it a step further and increase the profitability of your farm, the tractor tyre experts has prepared a free, highly detailed, ebook which explains the essential role of farming tyres on your productivity..

Download eBook: Increase the profitability of your operation

Most people who read this article have also read some of the following articles:

This information is intended only to make you aware of the technical and functional aspects of agricultural tires and their use. It does not allow you to make a judgment or a definitive conclusion on a given problem. Only your agricultural tire expert is able to make a technical assessment and take a final decision, case by case.


Leave a
commentary

Your email address will not be published.
Required fields are indicated with *